1749848315

CHANGELOG.txt

@@ -1,13 +1,13 @@
 Added RTC (https://www.adafruit.com/product/3013)
     added packages python3-smbus i2c-tools to installer
-    updated installer to set gpio baud to 460800
+    updated installer to set gpio baud to 115200
     added rtc i2c overlay /boot/firmware/config.txt
     removed fake-hwclock package
 NEO GPS Module
     Wiring
         Changed to 5v mode
     U-Center-2 (https://www.u-blox.com/en/u-center-2)
-        Changed Baudrate UART1 to 460800
+        Changed Baudrate UART1 to 115200
         Time Pulse Mode
             Antenna Cable Delay set to the calculated 14ns
 Installer

debug-level-conf-dev/boot-firmware-config.txt

@@ -5,7 +5,7 @@ dtoverlay=pps-gpio,gpiopin=18
 
 ## GPS GPIO UART
 enable_uart=1
-init_uart_baud=460800
+init_uart_baud=115200
 
 ## I2C Hardware RTC Overlay
 dtoverlay=i2c-rtc,ds3231

debug-level-conf-dev/gpsd

@@ -4,8 +4,8 @@
 DEVICES="/dev/ttyS0 /dev/pps0"
 
 # -n means start without a client connection (i.e. at boot)
-# -s 460800 is to set baud to 460800
+# -s 115200 is to set baud to 115200
-GPSD_OPTIONS="-n -s 460800"
+GPSD_OPTIONS="-n -s 115200"
 
 # also start in general
 START_DAEMON="true"