PrincessPi/Precision-Timekeeping-Fuckery
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

testan a reboold

Browse Source
This commit is contained in:
Princess Pi
2025-10-14 06:59:47 -06:00
parent 242df71339
commit 120bbd40b8
5 changed files with 50 additions and 54 deletions
Download Patch File Download Diff File Expand all files Collapse all files
installer1.sh
+8 -8
View File
@@ -9,29 +9,29 @@ else
fi
# initial delay to make sure its good
echo "Sleeping 3 minutes to make sure everything is as stable as possible"
echo -e "\nSleeping 3 minutes to make sure everything is as stable as possible\n"
sleep 180
# rpi-update
echo "Updating Raspberry Pi firmware... DO NOT REBOOT"
echo -e "\nUpdating Raspberry Pi firmware... DO NOT REBOOT\n"
sudo rpi-update
# safety delay
echo "Sleeping 60 seconds to make sure its as stable as possible"
echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
sleep 60
# run da raspberry pi config script
clear
echo "Configure Raspberry Pi... DO NOT REBOOT"
echo -e "\nConfigure Raspberry Pi... DO NOT REBOOT\n"
echo -e "Enable I2C Support in raspi-config\n\tInterface Options->I2C->\n\t Would you like the ARM I2C interface to be enabled? <Yes>\n\tkernel module loaded by default <Yes>\n\nInterface Options->Serial Port\n\tWould you like a login shell to be accessible over serial? <No>\n\tWould you like the serial port hardware to be enabled? <Yes>\n"
read -p "Press ENTER to Continue"
sudo raspi-config
# update the log
echo "Installer1.sh complete" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
# notify finish
echo "Part 1 Done!"
echo -e "\nPart 2/5 Done!\n"
# update the log
echo "Installer1.sh complete 2/5" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
# reboot after 3 minutes for safety
echo -e "\nREBOOTING IN 3 MINUTES\n"