testan a reboold

installer3.sh

@@ -9,17 +9,17 @@ else
 fi
 
 # initial delay to make sure its good
-echo "Sleeping 3 minutes to make sure everything is as stable as possible"
+echo -e "\nSleeping 3 minutes to make sure everything is as stable as possible\n"
 sleep 180
 
 # grafana repo and install
-echo "Add Grafana repo..."
+echo -e "\nAdd Grafana repo...\n"
 sudo mkdir -p /etc/apt/keyrings/
 wget -q -O - https://apt.grafana.com/gpg.key | gpg --dearmor | sudo tee /etc/apt/keyrings/grafana.gpg
 echo "deb [signed-by=/etc/apt/keyrings/grafana.gpg] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
 
 # telegraf repo and install
-echo "Add Telegraf repo..."
+echo -e "\nAdd Telegraf repo...\n"
 curl --silent --location -O \
 https://repos.influxdata.com/influxdata-archive.key \
 && echo "943666881a1b8d9b849b74caebf02d3465d6beb716510d86a39f6c8e8dac7515  influxdata-archive.key" \
@@ -31,32 +31,32 @@ https://repos.influxdata.com/influxdata-archive.key \
 
 # remove dat key file thing
 if [ -f /home/$username/influxdata-archive.key ]; then
-    echo "Removing /home/$username/influxdata-archive.key..."
+    echo -e "\nRemoving /home/$username/influxdata-archive.key...\n"
     rm -f /home/$username/influxdata-archive.key
 else
-    echo "/home/$username/influxdata-archive.key not found, skipping delete..."
+    echo -e "\n/home/$username/influxdata-archive.key not found, skipping delete...\n"
 fi
 
 # updoot
-echo "Getting new software lists..."
+echo -e "\nGetting new software lists...\n"
 sudo apt update 
 
 # safety delay
-echo "Sleeping 60 seconds to make sure its as stable as possible"
+echo -e "\nSleeping 60 seconds to make sure its as stable as possibl\n"
 sleep 60
 
 # clean up
-echo "Disabling unneeded junk..."
+echo -e "\nDisabling unneeded junk..\n"
 sudo systemctl disable bluetooth
 sudo update-rc.d -f fake-hwclock remove
 # sudo systemctl disable fake-hwclock
 
 # install da packages
-echo "Installing packages, this may take a while..."
+echo -e "\nInstalling packages, this may take a while...\n"
 sudo apt install -y util-linux gawk telegraf grafana influxdb restic build-essential net-tools htop btop screen byobu python3 python3-pip python3-virtualenv python3-setuptools thefuck wget lynx nmap zip unzip 7zip ripgrep pps-tools gh gpsd gpsd-clients chrony syslog-ng iptraf-ng i2c-tools picocom
 
 # safety delay
-echo "Sleeping 60 seconds to make sure its as stable as possible"
+echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
 sleep 60
 
 # purging da junk
@@ -70,24 +70,24 @@ gerppps=$?
 
 # add pps-gpio to modules
 if [ $gerppps -eq 0 ]; then
-    echo "pps-gpio already in /etc/modules, skipping..."
+    echo -e "\npps-gpio already in /etc/modules, skipping..n"
 else
-    echo "Adding pps-gpio to /etc/modules..."
+    echo -e "\nAdding pps-gpio to /etc/modules...\n"
     sudo bash -c "echo 'pps-gpio' >> /etc/modules"
 fi
 
 # cleanup
-echo "Cleaning up..."
+echo -e "\nCleaning up...\n"
 sudo apt autoremove -y 
 
 # handle users serial shit
 ## self
-echo "Giving $username the right permissions..."
+echo -e "\nGiving $username the right permissions...\n"
 sudo usermod -aG dialout $username
 sudo usermod -a -G i2c $username
 sudo usermod -a -G tty $username
 ## service users
-echo "Giving service users the right permissions..."
+echo -e "\nGiving service users the right permissions...\n"
 sudo usermod -aG dialout gpsd
 sudo usermod -aG dialout _chrony
 sudo usermod -aG i2c _chrony
@@ -96,29 +96,29 @@ sudo usermod -aG tty _chrony
 sudo usermod -aG tty gpsd
 
 # safety delay
-echo "Sleeping 60 seconds to make sure its as stable as possible"
+echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
 sleep 60
 
 # installing ble.sh
-echo "Installing BLE.sh"
+echo -e "\nInstalling BLE.sh\n"
 git clone --recursive --depth 1 --shallow-submodules https://github.com/akinomyoga/ble.sh.git /tmp/ble.sh
 make -C /tmp/ble.sh install PREFIX=/home/$username/.local
 echo -e "\n# ble.sh" >> /home/$username/.bashrc
 echo "source -- /home/$username/.local/share/blesh/ble.sh" >> /home/$username/.bashrc
 
 # safety delay
-echo "Sleeping 60 seconds to make sure its as stable as possible"
+echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
 sleep 60
 
 # general-scripts-and-system-ssssssetup
-echo "Installing general-scripts-and-system-ssssssetup"
+echo -e "\nInstalling general-scripts-and-system-ssssssetup\n"
 curl -s https://raw.githubusercontent.com/PrincessPi3/general-scripts-and-system-ssssssetup/refs/heads/main/customscripts/install_script.sh?nocache=$RANDOM | sudo "$SHELL"
 
 # update the log
-echo "installer3.sh complete" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
+echo "installer3.sh complete 4/5" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
 
 # finish
-echo "Part 3 Done!"
+echo -e "\nPart 4/5 Done\n!"
 
 # reboot after 3 minutes for safety
 echo -e "\nREBOOTING IN 3 MINUTES\n"