PrincessPi/Precision-Timekeeping-Fuckery
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

testan a reboold

Browse Source
This commit is contained in:
Princess Pi
2025-10-14 06:59:47 -06:00
parent 242df71339
commit 120bbd40b8
5 changed files with 50 additions and 54 deletions
Download Patch File Download Diff File Expand all files Collapse all files
installer1.sh
+8 -8
View File
@@ -9,29 +9,29 @@ else
fi
# initial delay to make sure its good
echo "Sleeping 3 minutes to make sure everything is as stable as possible"
echo -e "\nSleeping 3 minutes to make sure everything is as stable as possible\n"
sleep 180
# rpi-update
echo "Updating Raspberry Pi firmware... DO NOT REBOOT"
echo -e "\nUpdating Raspberry Pi firmware... DO NOT REBOOT\n"
sudo rpi-update
# safety delay
echo "Sleeping 60 seconds to make sure its as stable as possible"
echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
sleep 60
# run da raspberry pi config script
clear
echo "Configure Raspberry Pi... DO NOT REBOOT"
echo -e "\nConfigure Raspberry Pi... DO NOT REBOOT\n"
echo -e "Enable I2C Support in raspi-config\n\tInterface Options->I2C->\n\t Would you like the ARM I2C interface to be enabled? <Yes>\n\tkernel module loaded by default <Yes>\n\nInterface Options->Serial Port\n\tWould you like a login shell to be accessible over serial? <No>\n\tWould you like the serial port hardware to be enabled? <Yes>\n"
read -p "Press ENTER to Continue"
sudo raspi-config
# update the log
echo "Installer1.sh complete" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
# notify finish
echo "Part 1 Done!"
echo -e "\nPart 2/5 Done!\n"
# update the log
echo "Installer1.sh complete 2/5" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
# reboot after 3 minutes for safety
echo -e "\nREBOOTING IN 3 MINUTES\n"
installer2.sh
+6 -6
View File
@@ -9,26 +9,26 @@ else
fi
# initial delay to make sure its good
echo "Sleeping 3 minutes to make sure everything is as stable as possible"
echo -e "\nSleeping 3 minutes to make sure everything is as stable as possible\n"
sleep 180
# full distribution upgrade
echo "Fully upgrading, this may take a while..."
echo -e "\nFully upgrading, this may take a while...\n"
sudo apt dist-upgrade -y
# safety delay
echo "Sleeping 60 seconds to make sure its as stable as possible"
echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
sleep 60
# cleanup
echo "Cleaning up..."
echo -e "\nCleaning up...\n"
sudo apt autoremove -y
# notify finish
echo "Part 2 Done!"
echo -e "\nPart 3/5 Done!\n"
# update the log
echo "Installer2.sh complete" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
echo "Installer2.sh complete 3/5" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
# reboot after 3 minutes for safety
echo -e "\nREBOOTING IN 3 MINUTES\n"
installer3.sh
+21 -21
View File
@@ -9,17 +9,17 @@ else
fi
# initial delay to make sure its good
echo "Sleeping 3 minutes to make sure everything is as stable as possible"
echo -e "\nSleeping 3 minutes to make sure everything is as stable as possible\n"
sleep 180
# grafana repo and install
echo "Add Grafana repo..."
echo -e "\nAdd Grafana repo...\n"
sudo mkdir -p /etc/apt/keyrings/
wget -q -O - https://apt.grafana.com/gpg.key | gpg --dearmor | sudo tee /etc/apt/keyrings/grafana.gpg
echo "deb [signed-by=/etc/apt/keyrings/grafana.gpg] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
# telegraf repo and install
echo "Add Telegraf repo..."
echo -e "\nAdd Telegraf repo...\n"
curl --silent --location -O \
https://repos.influxdata.com/influxdata-archive.key \
&& echo "943666881a1b8d9b849b74caebf02d3465d6beb716510d86a39f6c8e8dac7515 influxdata-archive.key" \
@@ -31,32 +31,32 @@ https://repos.influxdata.com/influxdata-archive.key \
# remove dat key file thing
if [ -f /home/$username/influxdata-archive.key ]; then
echo "Removing /home/$username/influxdata-archive.key..."
echo -e "\nRemoving /home/$username/influxdata-archive.key...\n"
rm -f /home/$username/influxdata-archive.key
else
echo "/home/$username/influxdata-archive.key not found, skipping delete..."
echo -e "\n/home/$username/influxdata-archive.key not found, skipping delete...\n"
fi
# updoot
echo "Getting new software lists..."
echo -e "\nGetting new software lists...\n"
sudo apt update
# safety delay
echo "Sleeping 60 seconds to make sure its as stable as possible"
echo -e "\nSleeping 60 seconds to make sure its as stable as possibl\n"
sleep 60
# clean up
echo "Disabling unneeded junk..."
echo -e "\nDisabling unneeded junk..\n"
sudo systemctl disable bluetooth
sudo update-rc.d -f fake-hwclock remove
# sudo systemctl disable fake-hwclock
# install da packages
echo "Installing packages, this may take a while..."
echo -e "\nInstalling packages, this may take a while...\n"
sudo apt install -y util-linux gawk telegraf grafana influxdb restic build-essential net-tools htop btop screen byobu python3 python3-pip python3-virtualenv python3-setuptools thefuck wget lynx nmap zip unzip 7zip ripgrep pps-tools gh gpsd gpsd-clients chrony syslog-ng iptraf-ng i2c-tools picocom
# safety delay
echo "Sleeping 60 seconds to make sure its as stable as possible"
echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
sleep 60
# purging da junk
@@ -70,24 +70,24 @@ gerppps=$?
# add pps-gpio to modules
if [ $gerppps -eq 0 ]; then
echo "pps-gpio already in /etc/modules, skipping..."
echo -e "\npps-gpio already in /etc/modules, skipping..n"
else
echo "Adding pps-gpio to /etc/modules..."
echo -e "\nAdding pps-gpio to /etc/modules...\n"
sudo bash -c "echo 'pps-gpio' >> /etc/modules"
fi
# cleanup
echo "Cleaning up..."
echo -e "\nCleaning up...\n"
sudo apt autoremove -y
# handle users serial shit
## self
echo "Giving $username the right permissions..."
echo -e "\nGiving $username the right permissions...\n"
sudo usermod -aG dialout $username
sudo usermod -a -G i2c $username
sudo usermod -a -G tty $username
## service users
echo "Giving service users the right permissions..."
echo -e "\nGiving service users the right permissions...\n"
sudo usermod -aG dialout gpsd
sudo usermod -aG dialout _chrony
sudo usermod -aG i2c _chrony
@@ -96,29 +96,29 @@ sudo usermod -aG tty _chrony
sudo usermod -aG tty gpsd
# safety delay
echo "Sleeping 60 seconds to make sure its as stable as possible"
echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
sleep 60
# installing ble.sh
echo "Installing BLE.sh"
echo -e "\nInstalling BLE.sh\n"
git clone --recursive --depth 1 --shallow-submodules https://github.com/akinomyoga/ble.sh.git /tmp/ble.sh
make -C /tmp/ble.sh install PREFIX=/home/$username/.local
echo -e "\n# ble.sh" >> /home/$username/.bashrc
echo "source -- /home/$username/.local/share/blesh/ble.sh" >> /home/$username/.bashrc
# safety delay
echo "Sleeping 60 seconds to make sure its as stable as possible"
echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
sleep 60
# general-scripts-and-system-ssssssetup
echo "Installing general-scripts-and-system-ssssssetup"
echo -e "\nInstalling general-scripts-and-system-ssssssetup\n"
curl -s https://raw.githubusercontent.com/PrincessPi3/general-scripts-and-system-ssssssetup/refs/heads/main/customscripts/install_script.sh?nocache=$RANDOM | sudo "$SHELL"
# update the log
echo "installer3.sh complete" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
echo "installer3.sh complete 4/5" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
# finish
echo "Part 3 Done!"
echo -e "\nPart 4/5 Done\n!"
# reboot after 3 minutes for safety
echo -e "\nREBOOTING IN 3 MINUTES\n"
installer4.sh
+6 -6
View File
@@ -9,11 +9,11 @@ else
fi
# initial delay to make sure its good
echo "Sleeping 3 minutes"
echo -e "\nSleeping 3 minutes\n"
sleep 180
# reconfigure to normal mode
echo "Starting configure script..."
echo -e "\nStarting configure script...\n"
# info level
# bash ./reconfig_full.sh ./reconfig_full.sh ./info-level-conf
# running (warn level)
@@ -22,11 +22,11 @@ echo "Starting configure script..."
bash /home/$username/Precision-Timekeeping-Fuckery/reconfig_full.sh /home/$username/Precision-Timekeeping-Fuckery/info-level-conf-huawaii
# safety delay
echo "Sleeping 60 seconds to make sure its as stable as possible"
echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
sleep 60
# enable services
echo "Enabling Services..."
echo -e "\nEnabling Services..."
echo -e "\tEnabling gpsd on boot"
sudo systemctl enable gpsd
echo -e "\tEnabling chrony on boot"
@@ -57,10 +57,10 @@ sudo systemctl enable logrotate
# sudo nano /lib/udev/hwclock-set
# update the log
echo "done!" > /home/$username/Precision-Timekeeping-Fuckery/status.txt
echo "installer4.sh done 5/5\nCOMPLETE AT $(date +%s)" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
# finish
echo "Part 4 Done!"
echo -e "\nPart 5/5 Done! Yaay! Done!\n"
# reboot after 3 minutes for safety
echo -e "\nREBOOTING IN 3 MINUTES\n"
installer_auto.sh
+9 -13
View File
@@ -11,31 +11,27 @@ else
fi
# initial delay to make sure its good
echo "Sleeping 3 minutes to make sure everything is as stable as possible"
echo -e "\nSleeping 3 minutes to make sure everything is as stable as possible\n"
sleep 180
# updoot
echo "Updating Software Lists"
echo -e "\nUpdating Software Lists\n"
sudo apt update
# install get for next step
echo "Installing git"
echo -e "\nInstalling git\n"
sudo apt install -y git
# download da thing
echo "Cloning Repo"
cd /home/$username
git clone https://github.com/PrincessPi3/Precision-Timekeeping-Fuckery.git
# done
echo "Stage 1 Complete"
git clone https://github.com/PrincessPi3/Precision-Timekeeping-Fuckery.git /home/$username/Precision-Timekeeping-Fuckery
# update the log
echo "installer_auto.sh complete" > /home/$username/Precision-Timekeeping-Fuckery/status.txt
echo -e "START AT $(date +%s)installer_auto.sh\ncomplete 1/5" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
# done
echo -e "\nStage 1/5 Complet\n"
# reboot after 3 minutes for safety
echo -e "\nREBOOTING IN 3 MINUTES\n"
sudo shutdown -r +3
# passwordless sudo for sudo group
# %sudo ALL = (ALL) NOPASSWD: ALL
sudo shutdown -r +3