testan a reboold

info-level-conf/root-crontab

@@ -1,4 +1,4 @@
-# m h  dom mon dow   command
 # set hardware I2C RTC hourly
 0 * * * * /bin/bash -c "/usr/sbin/hwclock -w 2>> /var/log/root-crontab.log"
+# webhook to notify of reboot
 @reboot /usr/share/customscripts/ifnet "/usr/share/customscripts/webhook bootup" 2>> /var/log/root-crontab.log

installer1.sh

@@ -1,15 +1,20 @@
 #!/bin/bash
 # set -e
 
+# get real user
 if [ ! -z $SUDO_USER ]; then
     username=$SUDO_USER
 else
     username=$USER
 fi
 
+# initial delay to make sure its good
+echo "Sleeping 3 minutes"
+sleep 180
+
 # rpi-update
-# echo "Updating Raspberry Pi firmware..."
+echo "Updating Raspberry Pi firmware..."
-# sudo rpi-update
+sudo rpi-update
 
 # run da raspberry pi config script
 clear
@@ -18,10 +23,10 @@ echo -e "Enable I2C Support in raspi-config\n\tInterface Options->I2C->\n\t Woul
 read -p "Press ENTER to Continue"
 sudo raspi-config
 
+# notify finish
 echo "Installer1.sh complete" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
-
 echo "Part 1 Done!"
-# echo "Rebooting now!"
+
-# sudo reboot
+# reboot after 3 minutes for safety
 echo -e "\nREBOOTING IN 3 MINUTES\n"
 sudo shutdown -r +3

installer2.sh

@@ -1,22 +1,31 @@
 #!/bin/bash
 # set -e
 
+# get real user
 if [ ! -z $SUDO_USER ]; then
     username=$SUDO_USER
 else
     username=$USER
 fi
 
+# initial delay to make sure its good
+echo "Sleeping 3 minutes"
+sleep 180
+
+# full distribution upgrade
 echo "Fully upgrading, this may take a while..."
 sudo apt dist-upgrade -y
 
+# cleanup
 echo "Cleaning up..."
 sudo apt autoremove -y
 
+# notify finish
+echo "Part 2 Done!"
+
+# update the log
 echo "Installer2.sh complete" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
 
-echo "Part 2 Done!"
+# reboot after 3 minutes for safety
-# echo "Rebooting now!"
-# sudo reboot
 echo -e "\nREBOOTING IN 3 MINUTES\n"
 sudo shutdown -r +3

installer3.sh

@@ -1,12 +1,17 @@
 #!/bin/bash
 # set -e
 
+# get real user
 if [ ! -z $SUDO_USER ]; then
     username=$SUDO_USER
 else
     username=$USER
 fi
 
+# initial delay to make sure its good
+echo "Sleeping 3 minutes"
+sleep 180
+
 # grafana repo and install
 echo "Add Grafana repo..."
 sudo mkdir -p /etc/apt/keyrings/
@@ -50,9 +55,6 @@ sudo apt install -y gawk ripgrep telegraf grafana influxdb restic build-essentia
 echo "Purging unneeded junk..."
 sudo apt purge -y "bluetooth*" "usb*" "wireless*" "pci*" "fonts*" "bluez*" "alsa*" fake-hwclock build-essential
 
-# echo "Setting hostname to grandfatherclock"
-# sudo hostnamectl set-hostname grandfatherclock
-
 # check if pps-gpio is in /etc/modules already
 grep -e "pps-gpio" /etc/modules
 gerppps=$?
@@ -65,6 +67,7 @@ else
     sudo bash -c "echo 'pps-gpio' >> /etc/modules"
 fi
 
+# cleanup
 echo "Cleaning up..."
 sudo apt autoremove -y 
 
@@ -73,6 +76,7 @@ sudo apt autoremove -y
 echo "Giving $username the right permissions..."
 sudo usermod -aG dialout $username
 sudo usermod -a -G i2c $username
+sudo usermod -a -G tty $username
 ## service users
 echo "Giving service users the right permissions..."
 sudo usermod -aG dialout gpsd
@@ -96,11 +100,11 @@ echo "Installing general-scripts-and-system-ssssssetup"
 curl -s https://raw.githubusercontent.com/PrincessPi3/general-scripts-and-system-ssssssetup/refs/heads/main/customscripts/install_script.sh?nocache=$RANDOM | sudo "$SHELL"
 
 # update the log
-cd /home/$username/Precision-Timekeeping-Fuckery
 echo "installer3.sh complete" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
 
+# finish
 echo "Part 3 Done!"
-# echo "Rebooting now!"
+
-# sudo reboot
+# reboot after 3 minutes for safety
 echo -e "\nREBOOTING IN 3 MINUTES\n"
 sudo shutdown -r +3

installer4.sh

@@ -1,12 +1,17 @@
 #!/bin/bash
 # set -e
 
+# get real user
 if [ ! -z $SUDO_USER ]; then
     username=$SUDO_USER
 else
     username=$USER
 fi
 
+# initial delay to make sure its good
+echo "Sleeping 3 minutes"
+sleep 180
+
 # reconfigure to normal mode
 echo "Starting configure script..."
 # info level
@@ -33,11 +38,12 @@ sudo systemctl enable syslog-ng
 echo -e "\tEnabling logrotate on boot"
 sudo systemctl enable logrotate
 
+# update the log
 echo "done!" > /home/$username/Precision-Timekeeping-Fuckery/status.txt
 
-# reboot rq
+# finish
 echo "Part 4 Done!"
-# echo "Rebooting now!"
+
-# sudo reboot
+# reboot after 3 minutes for safety
 echo -e "\nREBOOTING IN 3 MINUTES\n"
 sudo shutdown -r +3

installer_auto.sh

@@ -3,28 +3,40 @@
 ## curl -s https://raw.githubusercontent.com/PrincessPi3/Precision-Timekeeping-Fuckery/refs/heads/main/installer_auto.sh?nocache=$RANDOM | sudo $SHELL
 # set -e
 
+# get real username (not root) if run with sudo
 if [ ! -z $SUDO_USER ]; then
     username=$SUDO_USER
 else
     username=$USER
 fi
 
+# initial delay to make sure its good
+echo "Sleeping 3 minutes"
+sleep 180
+
+# passwordless sudo
 echo -e "Edit sudoers file\n\t%sudo ALL = (ALL) NOPASSWD: ALL"
 sudo visudo
 
+# updoot
 echo "Updating Software Lists"
 sudo apt update 
 
+# install get for next step
 echo "Installing git"
 sudo apt install -y git
 
+# download da thing
 echo "Cloning Repo"
 cd /home/$username
 git clone https://github.com/PrincessPi3/Precision-Timekeeping-Fuckery.git
-cd /home/$username/Precision-Timekeeping-Fuckery
 
+# done
 echo "Stage 1 Complete"
+
+# update the log
 echo "installer_auto.sh complete" > /home/$username/Precision-Timekeeping-Fuckery/status.txt
 
+# reboot after 3 minutes for safety
 echo -e "\nREBOOTING IN 3 MINUTES\n"
 sudo shutdown -r +3