diff --git a/installer_auto.sh b/installer_auto.sh
index e197c44..cc07ee5 100644
--- a/installer_auto.sh
+++ b/installer_auto.sh
@@ -3,6 +3,13 @@
 ## curl -s https://raw.githubusercontent.com/PrincessPi3/Precision-Timekeeping-Fuckery/refs/heads/main/installer_auto.sh?nocache=$RANDOM | "$SHELL"
 # set -e
 
+# delays in minutes
+long_delay=3
+short_delay=1
+
+# first install
+first_install="git"
+
 # get real username (not root) if run with sudo
 if [ ! -z $SUDO_USER ]; then
     username=$SUDO_USER
@@ -10,28 +17,287 @@ else
     username=$USER
 fi
 
+# calculated values
+git_dir="/home/$username/Precision-Timekeeping-Fuckery"
+status_log="$git_dir/status.txt"
+installer_status="$git_dir/installer.tmp"
+long_delay_seconds=$(($long_delay * 60))
+short_delay_seconds=$(($short_delay * 60))
+
+phase_one () {
+    # initial delay to make sure its good
+    echo -e "\nSleeping $long_delay minutes to make sure everything is as stable as possible\n"
+    sleep $long_delay_seconds
+
+    # updoot
+    echo -e "\nUpdating Software Lists\n"
+    sudo apt update 
+
+    # install get for next step
+    echo -e "\nInstalling git\n"
+    sudo bash -c "apt install -y $first_install"
+
+    # download da thing
+    echo -e "\nCloning Repo\n"
+    git clone https://github.com/PrincessPi3/Precision-Timekeeping-Fuckery.git $git_dir
+
+    # update the log
+    echo -e "START AT $(date +%s)installer_auto.sh\ncomplete 1/5" >> $status_log
+
+    # update the running file
+    echo 1 > $installer_status
+
+    # done
+    echo -e "\nStage 1/5 Complet\n"
+
+    # reboot after 3 minutes for safety
+    echo -e "\nREBOOTING IN 3 MINUTES\n"
+    sudo shutdown -r +$long_delay
+}
+
+phase_two () {
+    # initial delay to make sure its good
+    echo -e "\nSleeping 3 minutes to make sure everything is as stable as possible\n"
+    sleep $long_delay_seconds
+
+    # rpi-update
+    echo -e "\nUpdating Raspberry Pi firmware... DO NOT REBOOT\n"
+    sudo rpi-update
+
+    # safety delay
+    echo -e "\nSleeping $short_delay_seconds seconds to make sure its as stable as possible\n"
+    sleep $short_delay_seconds
+
+    # run da raspberry pi config script
+    clear
+    echo -e "\nConfigure Raspberry Pi... DO NOT REBOOT\n"
+    echo -e "Enable I2C Support in raspi-config\n\tInterface Options->I2C->\n\t Would you like the ARM I2C interface to be enabled? <Yes>\n\tkernel module loaded by default <Yes>\n\nInterface Options->Serial Port\n\tWould you like a login shell to be accessible over serial? <No>\n\tWould you like the serial port hardware to be enabled? <Yes>\n"
+    read -p "Press ENTER to Continue"
+    sudo raspi-config
+
+    # notify finish
+    echo -e "\nPart 2/5 Done!\n"
+
+    # update the running file
+    echo 2 > $installer_status
+
+    # update the log
+    echo "installer1.sh complete 2/5" >> $status_log
+
+    # reboot after 3 minutes for safety
+    echo -e "\nREBOOTING IN 3 MINUTES\n"
+    sudo shutdown -r +$long_delay
+}
+
+phase_three () {
+    # initial delay to make sure its good
+    echo -e "\nSleeping $long_delay minutes to make sure everything is as stable as possible\n"
+    sleep $long_delay_seconds
+
+    # full distribution upgrade
+    echo -e "\nFully upgrading, this may take a while...\n"
+    sudo apt dist-upgrade -y
+
+    # safety delay
+    echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
+    sleep $short_delay_seconds
+
+    # cleanup
+    echo -e "\nCleaning up...\n"
+    sudo apt autoremove -y
+
+    # update the running file
+    echo 3 > $installer_status
+
+    # notify finish
+    echo -e "\nPart 3/5 Done!\n"
+
+    # update the log
+    echo "Installer2.sh complete 3/5" >> $status_log
+
+    # reboot after 3 minutes for safety
+    echo -e "\nREBOOTING IN 3 MINUTES\n"
+    sudo shutdown -r +$long_delay
+}
+
+phase_four () {
+    # initial delay to make sure its good
+    echo -e "\nSleeping 3 minutes to make sure everything is as stable as possible\n"
+    sleep $long_delay_seconds
+
+    # grafana repo and install
+    echo -e "\nAdd Grafana repo...\n"
+    sudo mkdir -p /etc/apt/keyrings/
+    wget -q -O - https://apt.grafana.com/gpg.key | gpg --dearmor | sudo tee /etc/apt/keyrings/grafana.gpg
+    echo "deb [signed-by=/etc/apt/keyrings/grafana.gpg] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
+
+    # telegraf repo and install
+    echo -e "\nAdd Telegraf repo...\n"
+    curl --silent --location -O \
+    https://repos.influxdata.com/influxdata-archive.key \
+    && echo "943666881a1b8d9b849b74caebf02d3465d6beb716510d86a39f6c8e8dac7515  influxdata-archive.key" \
+    | sha256sum -c - && cat influxdata-archive.key \
+    | gpg --dearmor \
+    | sudo tee /etc/apt/trusted.gpg.d/influxdata-archive.gpg \
+    && echo 'deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive.gpg] https://repos.influxdata.com/debian stable main' \
+    | sudo tee /etc/apt/sources.list.d/influxdata.list >/dev/null # otherwisse get some stupid binary output to terminal
+
+    # remove dat key file thing
+    if [ -f /home/$username/influxdata-archive.key ]; then
+        echo -e "\nRemoving /home/$username/influxdata-archive.key...\n"
+        rm -f /home/$username/influxdata-archive.key
+    else
+        echo -e "\n/home/$username/influxdata-archive.key not found, skipping delete...\n"
+    fi
+
+    # updoot
+    echo -e "\nGetting new software lists...\n"
+    sudo apt update 
+
+    # safety delay
+    echo -e "\nSleeping 60 seconds to make sure its as stable as possibl\n"
+    sleep $short_delay_seconds
+
+    # clean up
+    echo -e "\nDisabling unneeded junk..\n"
+    sudo systemctl disable bluetooth
+    sudo update-rc.d -f fake-hwclock remove
+    # sudo systemctl disable fake-hwclock
+
+    # install da packages
+    echo -e "\nInstalling packages, this may take a while...\n"
+    sudo apt install -y util-linux gawk telegraf grafana influxdb restic build-essential net-tools htop btop screen byobu python3 python3-pip python3-virtualenv python3-setuptools thefuck wget lynx nmap zip unzip 7zip ripgrep pps-tools gh gpsd gpsd-clients chrony syslog-ng iptraf-ng i2c-tools picocom
+
+    # safety delay
+    echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
+    sleep $short_delay_seconds
+
+    # purging da junk
+    # dont actually think this is at worth the space savings
+    # echo "Purging unneeded junk..."
+    # sudo apt purge -y "bluetooth*" "usb*" "wireless*" "pci*" "fonts*" "bluez*" "alsa*"
+
+    # check if pps-gpio is in /etc/modules already
+    grep -e "pps-gpio" /etc/modules
+    gerppps=$?
+
+    # add pps-gpio to modules
+    if [ $gerppps -eq 0 ]; then
+        echo -e "\npps-gpio already in /etc/modules, skipping..n"
+    else
+        echo -e "\nAdding pps-gpio to /etc/modules...\n"
+        sudo bash -c "echo 'pps-gpio' >> /etc/modules"
+    fi
+
+    # cleanup
+    echo -e "\nCleaning up...\n"
+    sudo apt autoremove -y 
+
+    # handle users serial shit
+    ## self
+    echo -e "\nGiving $username the right permissions...\n"
+    sudo usermod -aG dialout $username
+    sudo usermod -a -G i2c $username
+    sudo usermod -a -G tty $username
+    ## service users
+    echo -e "\nGiving service users the right permissions...\n"
+    sudo usermod -aG dialout gpsd
+    sudo usermod -aG dialout _chrony
+    sudo usermod -aG i2c _chrony
+    sudo usermod -aG i2c gpsd
+    sudo usermod -aG tty _chrony
+    sudo usermod -aG tty gpsd
+
+    # safety delay
+    echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
+    sleep $short_delay_seconds
+
+    # installing ble.sh
+    echo -e "\nInstalling BLE.sh\n"
+    bashrc="/home/$username/.bashrc"
+    git clone --recursive --depth 1 --shallow-submodules https://github.com/akinomyoga/ble.sh.git /tmp/ble.sh
+    make -C /tmp/ble.sh install PREFIX=/home/$username/.local
+    echo -e "\n# ble.sh" >> $bashrc
+    echo "source -- /home/$username/.local/share/blesh/ble.sh" >> $bashrc
+
+    # safety delay
+    echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
+    sleep $short_delay_seconds
+
+    # general-scripts-and-system-ssssssetup
+    echo -e "\nInstalling general-scripts-and-system-ssssssetup\n"
+    curl -s https://raw.githubusercontent.com/PrincessPi3/general-scripts-and-system-ssssssetup/refs/heads/main/customscripts/install_script.sh?nocache=$RANDOM | sudo "$SHELL"
+
+    # update the running file
+    echo 4 > $installer_status
+
+    # update the log
+    echo "installer3.sh complete 4/5" >> $status_log
+
+    # finish
+    echo -e "\nPart 4/5 Done\n!"
+
+    # reboot after 3 minutes for safety
+    echo -e "\nREBOOTING IN 3 MINUTES\n"
+    sudo shutdown -r +$long_delay
+}
+
+phase_five () {
 # initial delay to make sure its good
-echo -e "\nSleeping 3 minutes to make sure everything is as stable as possible\n"
-sleep 180
+echo -e "\nSleeping $long_delay minutes\n"
+sleep $long_delay_seconds
 
-# updoot
-echo -e "\nUpdating Software Lists\n"
-sudo apt update 
+# reconfigure to normal mode
+echo -e "\nStarting configure script...\n"
+# info level
+# bash ./reconfig_full.sh ./reconfig_full.sh ./info-level-conf
+# running (warn level) 
+# bash ./reconfig_full.sh ./running-warn-level-conf
+# debug/dev mode
+bash $git_dir/reconfig_full.sh "$git_dir/info-level-conf-huawaii"
 
-# install get for next step
-echo -e "\nInstalling git\n"
-sudo apt install -y git
+# safety delay
+echo -e "\nSleeping 60 seconds to make sure its as stable as possible\n"
+sleep $short_delay_seconds
 
-# download da thing
-echo "Cloning Repo"
-git clone https://github.com/PrincessPi3/Precision-Timekeeping-Fuckery.git /home/$username/Precision-Timekeeping-Fuckery
+# enable services
+echo -e "\nEnabling Services..."
+echo -e "\tEnabling gpsd on boot"
+sudo systemctl enable gpsd
+echo -e "\tEnabling chrony on boot"
+sudo systemctl enable chrony
+echo -e "\tEnabling influxdb on boot"
+sudo systemctl enable influxdb
+echo -e "\tEnabling telegraf on boot"
+sudo systemctl enable telegraf
+echo -e "\tEnabling grafana on boot"
+sudo systemctl enable grafana-server
+echo -e "\tEnabling syslog-ng on boot"
+sudo systemctl enable syslog-ng
+echo -e "\tEnabling logrotate on boot"
+sudo systemctl enable logrotate
+
+# unclear if this is needed
+# edit dis
+## comment out and add note
+##     # commented out manually to use rtc
+##     # if [ -e /run/systemd/system ] ; then
+##     #  exit 0
+##     # fi
+## Also comment out the two lines
+##     #  /sbin/hwclock --rtc=$dev --systz --badyear
+##     and
+##     # /sbin/hwclock --rtc=$dev --systz
+# echo "Editing hwclock-set file"
+# sudo nano /lib/udev/hwclock-set
 
 # update the log
-echo -e "START AT $(date +%s)installer_auto.sh\ncomplete 1/5" >> /home/$username/Precision-Timekeeping-Fuckery/status.txt
+echo "installer4.sh done 5/5\nCOMPLETE AT $(date +%s)" >> $status_log
 
-# done
-echo -e "\nStage 1/5 Complet\n"
+# finish
+echo -e "\nPart 5/5 Done! Yaay! Done!\n"
 
 # reboot after 3 minutes for safety
-echo -e "\nREBOOTING IN 3 MINUTES\n"
-sudo shutdown -r +3
\ No newline at end of file
+echo -e "\nREBOOTING IN $long_delay MINUTES\n"
+sudo shutdown -r +$long_delay
+}
\ No newline at end of file