PrincessPi/Precision-Timekeeping-Fuckery
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

idk fam im just vibing

Browse Source
This commit is contained in:
Princess Pi
2026-03-28 06:26:29 -06:00
parent abf39eb70d
commit 83fd804ed5
1 changed files with 38 additions and 53 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Grandfatherclock.md
+37 -52
View File
@@ -11,19 +11,17 @@
6. Best GPS Antenna+Cable for it 6. Best GPS Antenna+Cable for it
7. PPS Settings 7. PPS Settings
8. UART Speed settings 8. UART Speed settings
9. Any pulse out (32kHz/ maybe?) 2. RPI5
2. [Pulsar Clock](Pulsar-Clock.md) 1. pulse out/in (32kHz 31.25us period/10mhz 1ns period?)
3. [Pulsar Clock](Pulsar-Clock.md)
1. all daaat shit lmao 1. all daaat shit lmao
## Hardware ## Hardware
1. [Raspberry Pi 5 16GB](https://www.adafruit.com/product/6125)
1. Raspberry Pi 5 16GB
1. Raspberry OS Lite 1. Raspberry OS Lite
2. Will need to carefully use real time priority, maybe even pinned to a core? 2. Will need to carefully use real time priority, maybe even pinned to a core?
3. gpsd, etc? 1. gpsd, etc?
4. reading pulses/etc 2. Reading GPIO Pulses/etc
5. uart? 3. UART?
```bash ```bash
sudo taskset -cp 2 1234 # set task pid 1234 pin to core 2 sudo taskset -cp 2 1234 # set task pid 1234 pin to core 2
``` ```
@@ -33,61 +31,52 @@ sudo chrt -f -p 90 1234 # set pid 1234 to priority 90 (1-99  highest)
``` ```
1. RTC 32khz pulses (31.25us period) 1. RTC 32khz pulses (31.25us period)
2. Pulsar readings
2. pulsar readings
3. RTC set/read over i2c 3. RTC set/read over i2c
4. GPS Module PPS 4. GPS Module PPS
5. NVME hat for NVME boot (? IF NOT INTERFERE WITH GPIO SHIT) 5. NVME hat for NVME boot (? IF NOT INTERFERE WITH GPIO SHIT)
1. NVME SSD (? IF NOT INTERFERE WITH GPIO SHIT) 1. NVME SSD (? IF NOT INTERFERE WITH GPIO SHIT)
6. **Custom Hat** 6. **Custom Hat**
1. [Adafruit DS3231 RTC Precision I2C Breakout Module](https://www.adafruit.com/product/3013#tutorials) x1 1. [Adafruit DS3231 RTC Precision I2C Breakout Module](https://www.adafruit.com/product/3013#tutorials) x1
[CR1220](https://www.adafruit.com/products/380) x1 (Battery) [CR1220](https://www.adafruit.com/products/380) x1 (Battery)
7. [Gen 10 Timekeeping Specific GPS Module - NEO-F10T](https://gnss.store/collections/neo-f10t-timing-gnss-modules) 7. [Gen 10 Timekeeping Specific GPS Module - NEO-F10T](https://gnss.store/collections/neo-f10t-timing-gnss-modules)
1.  [Buy Varieties (Europe)](https://gnss.store/collections/neo-f10t-timing-gnss-modules) 1.  
1. Make sure battery TYPE and APPLICATION is figured out
2. May have to solder in holder or something
8. GPS Module 8. GPS Module
1\. [Gen 10 Timekeeping Specific GPS Module - NEO-F10T](https://gnss.store/collections/neo-f10t-timing-gnss-modules) 1. [Buy Varieties (Europe)](https://gnss.store/collections/neo-f10t-timing-gnss-modules)
1. Make sure **BATTERY** **TYPE** and **APPLICATION** is figured out
1. [Product Summary](https://content.u-blox.com/sites/default/files/documents/NEO-F10T_ProductSummary_UBX-22025534.pdf) 2. May have to solder in holder or something
2. [Data Sheet](https://content.u-blox.com/sites/default/files/documents/NEO-F10T_DataSheet_UBX-22022576.pdf) 1. use the good solder/pins/wire :3
3. [Hardware Integration Guide](https://content.u-blox.com/sites/default/files/documents/NEO-F10T_IntegrationManual_UBX-22018271.pdf) 3. Make fuckin sure af you have a good fuckin pinout
4. [Chip Product Page](https://www.u-blox.com/en/product/neo-f10t-module) 4. check if can be configed via uart using [u-center-2](https://www.u-blox.com/en/u-center-2)?
1. figure out a convenient UART (Tigard/FT422H) and plug
``` 2. Make sure GPIO pins are FUCKING **2.54mm** AND **3.3v** OR **5v**
2. Make sure GPIO pins are FUCKING 2.54mm AND 3.3v OR 5v 1. use good/gold/copper pinssss/wire/solder
1. use goldddd pinssss~ 9. [Gen 10 Timekeeping Specific GPS Module - NEO-F10T](https://gnss.store/collections/neo-f10t-timing-gnss-modules)
3. GPS cable 10. [Product Summary](https://content.u-blox.com/sites/default/files/documents/NEO-F10T_ProductSummary_UBX-22025534.pdf)
1. check connectors 11. [Data Sheet](https://content.u-blox.com/sites/default/files/documents/NEO-F10T_DataSheet_UBX-22022576.pdf)
2. check adaptors 12. [Hardware Integration Guide](https://content.u-blox.com/sites/default/files/documents/NEO-F10T_IntegrationManual_UBX-22018271.pdf)
3. check variety 13. [Chip Product Page](https://www.u-blox.com/en/product/neo-f10t-module)
1. speed/length
2. check length
4. GPS antenna
1. check protos
2. check bands
3. check features
4. check connectors
```
9. GPS cable
1. check connectors
2. check adaptors
3. check variety
1. speed/length
2. check length
10. GPS antenna
1. check protos
2. check bands
3. check features
4. check connectors
## RPI5 Wiring ## RPI5 Wiring
- [GPIO Simple Pinout](https://vilros.com/pages/raspberry-pi-5-pinout) - [GPIO Simple Pinout](https://vilros.com/pages/raspberry-pi-5-pinout)
- [GPIO Detailed Pinout](https://pinout.xyz/pinout/3v3_power) - [GPIO Detailed Pinout](https://pinout.xyz/pinout/3v3_power)
### Wiring of Note ### Wiring of Note
- CLK/PCM/GPIO18/PIN12: - CLK/PCM/GPIO18/PIN12:
- CLK in/out up to 10mHz (1ns period) - CLK in/out up to 10mHz (1ns period)
- ![9824306b308e6d2d21274a5bfe933c6b.png](../../_resources/9824306b308e6d2d21274a5bfe933c6b.png) - ![9824306b308e6d2d21274a5bfe933c6b.png](../../_resources/9824306b308e6d2d21274a5bfe933c6b-1.png)
- only one i2c port? - only one i2c port?
- mostly all 3v3? - mostly all 3v3?
- PCM is kinda like DAC? - PCM is kinda like DAC?
@@ -95,15 +84,11 @@ sudo chrt -f -p 90 1234 # set pid 1234 to priority 90 (1-99  highest)
- PWM? - PWM?
- find sum DAC/ADC? sumtin? - find sum DAC/ADC? sumtin?
- **May have to nix double RTC Module** - **May have to nix double RTC Module**
### Wiring ### Wiring
- UART (GPS Module, tinker with speed) - UART (GPS Module, tinker with speed)
- I2C (RTC) - I2C (RTC)
- CLK/PCM/GPIO READ? (RTC 32khz pulse - 31.25us period) - CLK/PCM/GPIO READ? (RTC 32khz pulse - 31.25us period)
## Operation Flow ## Operation Flow
Both RTCs loaded time over I2C, both inputting 32kHz (31.25us period) signal via GPIO Both RTCs loaded time over I2C, both inputting 32kHz (31.25us period) signal via GPIO
RTC time, GPS time, system time, GPS PPS, 32kHz (31.25us period) signal, pulsar readings: RTC time, GPS time, system time, GPS PPS, 32kHz (31.25us period) signal, pulsar readings:
@@ -128,8 +113,8 @@ RTC time, GPS time, system time, GPS PPS, 32kHz (31.25us period) signal, pulsar
4. Repeatability check 4. Repeatability check
5. Accuracy check 5. Accuracy check
6. Precision check 6. Precision check
## Maybe ## Maybe
1. Play with PPS (dial faster?) 1. Play with PPS (dial faster?)
2. Play with UART speed (dial faster?) 2. Play with UART speed (dial faster?)
3. tinker with 10mhz clock out/test/tinker
4. tinker with 32khz clock in/test/tinker