Added ESP32C6

README.md

@@ -8,8 +8,8 @@ It's purpose is to be a bridge between a CAN-Bus and a HTTP-Server.
 
 
 # Software requirement
-esp-idf v4.4/v5.0.   
-This is because this version supports ESP32-C3.   
+ESP-IDF V4.4/V5.x.   
+ESP-IDF V5.1 is required when using ESP32C6.   
 
 # Hardware requirements
 - SN65HVD23x CAN-BUS Transceiver   
@@ -18,7 +18,7 @@ This is because this version supports ESP32-C3.
 I used 150 ohms.   
 
 # Wireing   
-|SN65HVD23x||ESP32|ESP32-S2/S3|ESP32-C3||
+|SN65HVD23x||ESP32|ESP32-S2/S3|ESP32-C3/C6||
 |:-:|:-:|:-:|:-:|:-:|:-:|
 |D(CTX)|--|GPIO21|GPIO17|GPIO0|(*1)|
 |GND|--|GND|GND|GND||
@@ -77,7 +77,7 @@ Check [here](http://www.ti.com/lit/an/slla337/slla337.pdf).
 ```
 git clone https://github.com/nopnop2002/esp-idf-can2http
 cd esp-idf-can2http
-idf.py set-target {esp32/esp32s2/esp32s3/esp32c3}
+idf.py set-target {esp32/esp32s2/esp32s3/esp32c3/esp32c6}
 idf.py menuconfig
 idf.py flash
 ```