migration

args_file.txt

@@ -0,0 +1,5 @@
+internal-ROM0 instruction-bus 0x4000_0000 0x4003_FFFF
+internal-ROM1 data-bus 0x3FF0_0000 0x3FF1_FFFF
+internal-ROM1 instruction-bus 0x4004_0000 0x4005_FFFF
+elf-start-addr unknown-bus 0x3FCD_7000 0x3FF1_8C00
+elf-later-addr unknown-bus 0x4000_0000 0x4005_8000

espdump.sh

@@ -0,0 +1,67 @@
+#!/bin/zsh
+datestamp=$(date "+%d%m%y%H%M%S")
+chip="esp32s3"
+file_prefix=$1
+out_dir="./live-roms/$file_prefix-$datestamp"
+no_stub=True # True/False case sensitive
+args_file="./args_file.txt"
+log_file="$out_dir/log.txt"
+tmp_file="./.dump_rom_tmp.tmp"
+start_header="Starting dump from chip: $chip\n	on port: $ESPPORT\n	at: $ESPBAUD baud\n	to directory: $out_dir\n	with log file: $log_file\n"
+
+mkdir $out_dir
+
+if [ "$no_stub" != "False" ]; then
+	stubby='--no-stub'
+fi
+
+
+echo "\n====================="
+echo $start_header
+
+echo $start_header >> $log_file
+
+# usage dump_section name bus start end
+# start and end are hex values in bytes beginning with 0x
+# name and bus are strings with no spaces
+dump_section () {
+	dump_length=0x$(([##16] $4 - $3))
+	file_name="$out_dir/$file_prefix-$chip-$1-$2-$3-$4-$dump_length-$datestamp.bin"
+	command="esptool.py \ \n	$stubby --baud $ESPBAUD \ \n	--port $ESPPORT \ \n	--chip $chip \ \n	dump_mem $3 $dump_length \ \n	$file_name"
+
+	header="$1\n	on $2\n 	starting: $3\n	ending: $4\n	length: $dump_length\n	on $chip\n	no_stub: $no_stub\n\nRunning: $command"
+
+	echo "\nDumping Section:\n$header\n\nPlease wait..."
+
+	echo $header >> $log_file
+	echo "	File: $file_name" >> $log_file
+	echo "	$command" >> $log_file
+
+	esptool.py `echo $stubby` --baud $ESPBAUD --port $ESPPORT --chip $chip dump_mem $3 $dump_length $file_name > $tmp_file
+	return_status=$?
+
+	if [ $return_status -ne 0 ]; then
+		echo "	ERROR: return status $return_status dump:" >> $log_file
+		cat $tmp_file >> $log_file
+		echo "ERROR: dump failed. check $log_file"
+		echo "esptool output:"
+		cat $tmp_file
+		rm $tmp_file
+		exit
+	fi
+
+	checksum=$(sha256sum $file_name)
+	echo "	Sucess\n===\n" >> $log_file
+	echo "	sha256sum: $checksum" >> $log_file
+	echo "Successfully dumped\nsha256sum: $checksum\n continuing..."
+}
+
+
+for args in ${(f)"$(<$args_file)"};
+do
+	dump_section `echo $args`
+done
+
+sha256sum "$out_dir/*" >> "$out_dir/sha256sum.txt"
+
+echo "\nDone :3"

espflashdump-esptool.txt

@@ -0,0 +1,4 @@
+esptool.py --port COMX --baud 115200 --chip esp32c3 get_security_info
+esptool.py --port COMX --baud 115200 --chip esp32c3 flash_id
+esptool.py --port COMX --baud 115200 --chip esp32c3 chip_id
+esptool.py --port COMX --baud 460800 --chip esp32c3 read_flash 0 ALL FlashMate-Dump-seeed-xiao-esp32c3.binC:\Users\human\OneDrive\Documents\Git\esp-tooling-special\espdump.ps1