bug fixes pre release version

README.md

@@ -20,7 +20,7 @@ Some take optional [branch] paramater
 [branch] is the esp-idf branch you desire, defaults to master if not specified.
 	default:
 		reinstalls non-interactively with no delays, logouts, or reboots
-			* `run-esp-cmd`
+			`run-esp-cmd`
 
 	test:
 		tests the script. very fast. minimal actions taken. no reinstall is done
@@ -77,41 +77,40 @@ Some take optional [branch] paramater
 ```
 
 ## Features
-```
+* `get-idf-tools` enter esp-idf
-`get-idf-tools` enter esp-idf
+* `help-esp-tools` show this help
-`help-esp-tools` show this help
+* `exit-esp-tools` exit esp-idf and reset terminal
-`exit-esp-tools` exit esp-idf and reset terminal
+* `build` idf.py build  
-`build` idf.py build  
+* `changebaud` prompts to enter a new baud  
-`changebaud` prompts to enter a new baud  
+* `changeesp` change esp device
-`changeesp` change esp device
+	* `changeesp` alone prompts to enter
-	`changeesp` alone prompts to enter
+* 	`changeesp <esp device>` manually changes to <esp device>
-	`changeesp <esp device>` manually changes to <esp device>
+	* ex. `changeesp esp32p4`
-		ex. `changeesp esp32p4`
+* `changeport` change serial port
-`changeport` change serial port
+	* `changeport` alone prompts to select
-	`changeport` alone prompts to select
+	* `changeport <tty device path>` manually specifies path
-	`changeport <tty device path>` manually specifies path
+		* ex. `changeport /dev/ttyUSB0` changes to /dev/ttyUSB0
-		ex. `changeport /dev/ttyUSB0` changes to /dev/ttyUSB0
+* `clean` idf.py clean  
-`clean` idf.py clean  
+* `fullclean` fully resets a project, 'idf.py fullclean' plus remove the build dir and delete some temp and backup files  
-`fullclean` fully resets a project, 'idf.py fullclean' plus remove the build dir and delete some temp and backup files  
+* `rebuildfull` does a `fullclean` but also an `erase-flash` and also `setup`  
-`rebuildfull` does a `fullclean` but also an `erase-flash` and also `setup`  
+* `setup` same as running `idf.py set-target $ESPTARGET; idf.py menuconfig; idf.py build`  
-`setup` same as running `idf.py set-target $ESPTARGET; idf.py menuconfig; idf.py build`  
+* `flash` idf.py flash  
-`flash` idf.py flash  
+* `monitor` idf.py monitor  
-`monitor` idf.py monitor  
+* `erase-flash` idf.py erase-flash  
-`erase-flash` idf.py erase-flash  
+* `save-defconfig` idf.py save-defconfig  
-`save-defconfig` idf.py save-defconfig  
+* `step-flash-monitor` attempt clean, build, flash, then monitor, dying on error  
-`step-flash-monitor` attempt clean, build, flash, then monitor, dying on error  
+* `imagesize` get binary size, broken down in various ways including total, by componant, and by file
-`imagesize` get binary size, broken down in various ways including total, by componant, and by file
+* `chipinfo` get information from the esp chip
-`chipinfo` get information from the esp chip
+* `espinfo` get detailed information from the esp chip
-`espinfo` get detailed information from the esp chip
+* `menuconfig` run `idf.py menuconfig`
-`menuconfig` run `idf.py menuconfig`
+* `create-project <project name>` same as idf.py create-project <proejct name>
-`create-project <project name>` same as idf.py create-project <proejct name>
+	* ex. `create-project hello-world`
-	ex. `create-project hello-world`
+* `esp-install-monitor` monitors install.log. alias for `tail -n 75 -f $ESPIDF_INSTALLDIR/install.log`
-`esp-install-monitor` monitors install.log. alias for `tail -n 75 -f $ESPIDF_INSTALLDIR/install.log`
+* `esp-install-logs` displays full text of install.log and version-data.txt
-`esp-install-logs` displays full text of install.log and version-data.txt
-```
 
 ### Cronjob
-	reinstall from master everyday at 4am, logging out users with warn delays and rebooting after
+
-	    `crontab -e`
+reinstall from master everyday at 4am, logging out users with warn delays and rebooting after
-	add below to bottom of file:
+* `crontab -e`
-		`0 4 * * * bash $HOME/esp/esp-install-custom/esp-idf-tools-cmd.sh cron
+add below to bottom of file:
+* `0 4 * * * bash $HOME/esp/esp-install-custom/esp-idf-tools-cmd.sh cron`

add-to-export-sh.txt

@@ -64,17 +64,14 @@ echo -e "\nSetting alias"
 alias changeport="source $binDir/changeport.sh"
 alias changebaud="source $binDir/changebaud.sh"
 alias changeesp="source $binDir/changeesp.sh"
-alias exit-esp-tools="source $binDir/exit-idf.sh"
+alias exit-esp-tools="source $binDir/exit-esp-tools.sh"
-alias monitor="idf.py monitor"
-alias flashmonitor="idf.py flash monitor"
-alias menuconfig="idf.py menuconfig"
 
 # echo -e "Changing dir to $ESPIDF_INSTALLDIR"
 cd $ESPIDF_INSTALLDIR
 
 echo -e "\nesp-idf version: $ESP_IDF_VERSION commit $commitHash from branch $branchData"
 
-echo -e "\nrun with `run_esp_cmd`"
+echo -e "\nrun with 'run_esp_cmd'"
 
 echo -e "\nWelcome to esp-idf!\nAll done :3\n"
 

custom_bin/changebaud.sh

@@ -14,8 +14,12 @@ subprocess() {
     return $selection
 }
 
-subprocess
+if [ ! -z $1 ]; then
-ret=$?
+    ret="$1"
+else
+    ret=''
+    subprocess ret
+fi
 
 export ESPBAUD=$ret
 echo "\nBaudrate set to $ESPBAUD\n"

custom_bin/espinfo

@@ -1,12 +1,13 @@
-echo "esp-idf install dir: $ESPIDF_INSTALLDIR"
+echo "esp-idf-tools install dir: $ESPIDF_INSTALLDIR"
+echo "esp-idf-tools last install: $(tail -1 $ESPIDF_INSTALLDIR/version-data.log)"
 echo "esp-idf path: $IDF_PATH"
 echo "esp-idf version: $ESP_IDF_VERSION"
-echo  "esp-idf python path: $IDF_PYTHON_ENV_PATH
+echo "esp-idf python path: $IDF_PYTHON_ENV_PATH"
 echo "openocd scripts: $OPENOCD_SCRIPTS"
 echo "esp-idf rom elf dir: $ESP_ROM_ELF_DIR"
 echo "esp-idf-deactivate file path $IDF_DEACTIVATE_FILE_PATH"
-echo  "esp-idf tools install cmd: $IDF_TOOLS_INSTALL_CMD"
+echo "esp-idf install cmd: $IDF_TOOLS_INSTALL_CMD"
-echo  "esp-idf-tools export cmd: $IDF_TOOLS_EXPORT_CMD"
+echo "esp-idf export cmd: $IDF_TOOLS_EXPORT_CMD"
 echo "port: $ESPPORT"
 echo "baud: $ESPBAUD"
-echo  "target device $SPTARGET"
+echo "target device: $ESPTARGET"

custom_bin/flashmonitor

@@ -0,0 +1 @@
+idf.py flash monitor

custom_bin/menuconfig

@@ -0,0 +1 @@
+idf.py menuconfig

custom_bin/monitor

@@ -0,0 +1 @@
+idf.py monitor

esp-idf-tools-cmd.sh

@@ -114,6 +114,18 @@ function writeToLog() {
 	echo -e "$(date '+%d/%m/%Y %H:%M:%S %Z (%s)'): $1" >> $log
 }
 
+function messagePTY() {
+	if [[ ! -z $1 ]]; then
+    	message="$1"
+	else
+    	message="Something happening! Maybe a shutdown!"
+	fi
+
+	for pts in $(ls -q /dev/pts); do
+    	sudo echo -e "$message" > /dev/pts/$pts # requires passwordless sudo
+	done
+}
+
 # this is not needed so long as warn doesnt god damned fucking work lmfao
 function handleSleep() {
 	# writeToLog "Handling sleep hold (function ran)\n"
@@ -353,57 +365,10 @@ function handleDownloadInstall() {
 }
 
 handleReboot() {
-	# writeToLog "Handling reboot: (function ran)\n"
+	messagePTY "\n\nRebooting in $sleepMins minutes!!\n\n"
 	sudo shutdown -r +$rebootMins
 }
 
-# warning not work how i make it work fuckin ell
-handleWarnAllUsers() {
-	# writeToLog "Warning all users of impending logout (function called)\n"
-	warningString="\nWARNING:\n\tReinstalling esp-idf:\n\tForce logut in $sleepMins minutes!!\n\tSave and log out!\n\tmonitor with \`esp+monitor\`\n\tterminate with \`sudo killall esp-idf-tools-cmd.sh\`\n"
-
-	writeToLog "$warningString"
-
-
-	loggedIn=$(who | awk '{print $1}' | uniq)
-
-	if [ -z $loggedIn ]; then
-		writeToLog "No users logged in to warn\n"
-		return
-	else
-		writeToLog "Skipping warning all logged in users: $loggedIn\n"
-	fi
-		# writeToLog "Warning all logged in users: $loggedIn"
-		# sudo wall --nobanner "$warningString"
-		# returnStatus
-		# warnChk=$?
-		#
-		# handleSleep
-
-}
-
-# dis one sure af be workan tho lmfao
-function handleLogoutAllUsers() {
-	# writeToLog "Handling user logout (function ran)\n"
-	handleWarnAllUsers
-
-	loggedIn=$(who | awk '{print $1}' | uniq)
-
-	if [ -z $loggedIn ]; then
-		writeToLog "No logged in users to log out\n"
-		return
-	else
-		writeToLog "Logging out all logged in users: $loggedIn"
-		echo $loggedIn | while read line; do
-		writeToLog "\tLogging out $line"
-			sudo loginctl terminate-user $line
-			returnStatus
-		done
-		returnStatus
-		logoutChk=$?
-	fi
-}
-
 function handleCheckEspIdf() {
 	if [ ! -z $IDF_PYTHON_ENV_PATH ]; then
 		writeToLog "FAIL: Sanity check failed!\n\tesp-idf environment varibles found!\n\tPelase run from a fresh termnal that has not had get_idf ran!\n"
@@ -508,7 +473,6 @@ if [[ "$arg" == "--help" || "$arg" == "help" || "$arg" == "-h" || "$arg" == "h"
 elif [[ "$arg" == "test" || "$arg" == "t" ]]; then # minimal actions taken, echo the given commands and such
  	action="TEST"
 	sleepMins=0
-	# testExport=1
 
   	installCmdTemp="echo $installCmd"
 	toolsInstallCmdTemp="echo $toolsInstallCmd"
@@ -601,14 +565,13 @@ elif [[ "$arg" == "cron" || "$arg" == "c" ]]; then # full install with warn, sle
 	idfGet="update"
 	sleepMins=0
 
+	messagePTY "esp-idf-tools action $action started!\nWill reboot with $sleepMins minutes delay when complete!"
 	handleStart
 	handleClearInstallLog
-	handleLogoutAllUsers
 	handleSetupEnvironment
 	handleCustomBins
 	handleDownloadInstall
 	handleExport
-	handleLogoutAllUsers
 	handleEnd
 	handleReboot
 
@@ -654,6 +617,7 @@ elif [[ "$arg" == "nukereboot" || "$arg" == "nr" ]]; then
 	sleepMins=1
 	idfGet="download"
 
+	messagePTY "esp-idf-tools action $action started!\nWill reboot with $sleepMins minutes delay when complete!"
 	handleStart
 	handleClearInstallLog
 	handleSetupEnvironment

test-scratch.sh

@@ -1,28 +1,10 @@
-source $HOME/.zshrc
+#!/bin/bash
-
+if [[ ! -z $1 ]]; then
-function checkAlias() {
+    message="$1"
-	echo "Testing $1"
+else
-	alias $1 2>/dev/null
+    message="PTS Default Message"
-	ret=$?
+fi
-	echo -e "\tretcode: $ret"
-	if [ $ret -eq 1 ]; then
-		echo "$1 not found"
-	else
-		echo "$1: $(alias $1)"
-	fi
-
-	return $ret
-}
-
-checkAlias get_idf
-checkAlias run_esp_reinstall
-checkAlias esp_monitor
-checkAlias esp_logs
-checkAlias notarealone
-
-# if [ -z $ESPIDF_INSTALLDIR ]; then
-# 	echo "ESPIDF_INSTALLDIR not found"
-# else
-# 	echo "ESPIDF_INSTALLDIR: $ESPIDF_INSTALLDIR"
-# fi
 
+for pts in $(ls -q /dev/pts); do
+    sudo echo "$message" > /dev/pts/$pts
+done

todo.txt

@@ -1,9 +1,15 @@
+test new pts messaging system
+    integrate 
+test espinfo
+test all for bugs
+audit readme
+    maybe pretty up
+test/fix changebaud/changebaud <baud>
+test menuconfig, monitor, flashmonitor
+
 mayhaps support bash?
     # mayhaps it already works mayhaps? test
 
-figure out how to message users properly
-    x at leastt remove sleeps if cant message ig lol
-
 verbosity levels?
     less verbose on git commands and installers?
     esp_install_logs