testan a reboold \

README.md

@@ -78,8 +78,8 @@
 #### Software (Auto)
 **WILL REBOOT IN BETWEEN EACH COMMAND**
 1. x `curl -s https://raw.githubusercontent.com/PrincessPi3/Precision-Timekeeping-Fuckery/refs/heads/main/installer_auto.sh?nocache=$RANDOM | "$SHELL"`  
-2. `git -C ~/Precision-Timekeeping-Fuckery pull && bash ~/Precision-Timekeeping-Fuckery/installer1.sh`
-3. `git -C ~/Precision-Timekeeping-Fuckery pull && git pull && bash ~/Precision-Timekeeping-Fuckery/installer2.sh`
+2. x `git -C ~/Precision-Timekeeping-Fuckery pull && bash ~/Precision-Timekeeping-Fuckery/installer1.sh`
+3. `git -C ~/Precision-Timekeeping-Fuckery pull && bash ~/Precision-Timekeeping-Fuckery/installer2.sh`
 4. `git -C ~/Precision-Timekeeping-Fuckery pull && bash ~/Precision-Timekeeping-Fuckery/installer3.sh`
 5. `git -C ~/Precision-Timekeeping-Fuckery pull && bash ~/Precision-Timekeeping-Fuckery/installer4.sh`
 6. `git -C ~/Precision-Timekeeping-Fuckery pull && bash ~/Precision-Timekeeping-Fuckery/test.sh`

installer1.sh

@@ -9,13 +9,17 @@ else
 fi
 
 # initial delay to make sure its good
-echo "Sleeping 3 minutes"
+echo "Sleeping 3 minutes to make sure everything is as stable as possible"
 sleep 180
 
 # rpi-update
 echo "Updating Raspberry Pi firmware... DO NOT REBOOT"
 sudo rpi-update
 
+# safety delay
+echo "Sleeping 60 seconds to make sure its as stable as possible"
+sleep 60
+
 # run da raspberry pi config script
 clear
 echo "Configure Raspberry Pi... DO NOT REBOOT"

installer2.sh

@@ -9,13 +9,17 @@ else
 fi
 
 # initial delay to make sure its good
-echo "Sleeping 3 minutes"
+echo "Sleeping 3 minutes to make sure everything is as stable as possible"
 sleep 180
 
 # full distribution upgrade
 echo "Fully upgrading, this may take a while..."
 sudo apt dist-upgrade -y
 
+# safety delay
+echo "Sleeping 60 seconds to make sure its as stable as possible"
+sleep 60
+
 # cleanup
 echo "Cleaning up..."
 sudo apt autoremove -y

installer3.sh

@@ -9,7 +9,7 @@ else
 fi
 
 # initial delay to make sure its good
-echo "Sleeping 3 minutes"
+echo "Sleeping 3 minutes to make sure everything is as stable as possible"
 sleep 180
 
 # grafana repo and install
@@ -41,6 +41,10 @@ fi
 echo "Getting new software lists..."
 sudo apt update 
 
+# safety delay
+echo "Sleeping 60 seconds to make sure its as stable as possible"
+sleep 60
+
 # clean up
 echo "Disabling unneeded junk..."
 sudo systemctl disable bluetooth
@@ -51,9 +55,13 @@ sudo update-rc.d -f fake-hwclock remove
 echo "Installing packages, this may take a while..."
 sudo apt install -y gawk ripgrep telegraf grafana influxdb restic build-essential net-tools htop btop iptraf iotop screen byobu python3 python3-pip python3-virtualenv python3-setuptools thefuck wget lynx nmap zip unzip 7zip net-tools restic ripgrep pps-tools git gh gpsd gpsd-clients chrony syslog-ng gh lynx btop htop iptraf-ng iotop neovim netcat-traditional python3-smbus i2c-tools picocom
 
+# safety delay
+echo "Sleeping 60 seconds to make sure its as stable as possible"
+sleep 60
+
 # purging da junk
 echo "Purging unneeded junk..."
-sudo apt purge -y "bluetooth*" "usb*" "wireless*" "pci*" "fonts*" "bluez*" "alsa*" fake-hwclock build-essential
+sudo apt purge -y "bluetooth*" "usb*" "wireless*" "pci*" "fonts*" "bluez*" "alsa*"
 
 # check if pps-gpio is in /etc/modules already
 grep -e "pps-gpio" /etc/modules
@@ -86,6 +94,10 @@ sudo usermod -aG i2c gpsd
 sudo usermod -aG tty _chrony
 sudo usermod -aG tty gpsd
 
+# safety delay
+echo "Sleeping 60 seconds to make sure its as stable as possible"
+sleep 60
+
 # installing ble.sh
 echo "Installing BLE.sh"
 git clone --recursive --depth 1 --shallow-submodules https://github.com/akinomyoga/ble.sh.git
@@ -93,6 +105,10 @@ make -C /tmp/ble.sh install PREFIX=/home/$username/.local
 echo -e "\n# ble.sh" >> /home/$username/.bashrc
 echo "source -- /home/$username/.local/share/blesh/ble.sh" >> /home/$username/.bashrc
 
+# safety delay
+echo "Sleeping 60 seconds to make sure its as stable as possible"
+sleep 60
+
 # general-scripts-and-system-ssssssetup
 echo "Installing general-scripts-and-system-ssssssetup"
 curl -s https://raw.githubusercontent.com/PrincessPi3/general-scripts-and-system-ssssssetup/refs/heads/main/customscripts/install_script.sh?nocache=$RANDOM | sudo "$SHELL"

installer4.sh

@@ -21,6 +21,10 @@ echo "Starting configure script..."
 # debug/dev mode
 bash /home/$username/Precision-Timekeeping-Fuckery/reconfig_full.sh /home/$username/Precision-Timekeeping-Fuckery/info-level-conf-huawaii
 
+# safety delay
+echo "Sleeping 60 seconds to make sure its as stable as possible"
+sleep 60
+
 # enable services
 echo "Enabling Services..."
 echo -e "\tEnabling gpsd on boot"

installer_auto.sh

@@ -11,7 +11,7 @@ else
 fi
 
 # initial delay to make sure its good
-echo "Sleeping 3 minutes"
+echo "Sleeping 3 minutes to make sure everything is as stable as possible"
 sleep 180
 
 # updoot