67 lines
2.3 KiB
Bash
67 lines
2.3 KiB
Bash
#!/bin/bash
|
|
set -e # dir on any error
|
|
|
|
# make sure dir works
|
|
if [ -z $1 ] || [ ! -d "$1" ]; then
|
|
echo "usage bash reconfig_full.sh /path/to/config/dir"
|
|
exit
|
|
fi
|
|
|
|
# paths
|
|
## place in system
|
|
gpsd="/etc/default/gpsd"
|
|
chrony="/etc/chrony/conf.d/precision_timekeeping.conf"
|
|
grafana="/etc/grafana/grafana.ini"
|
|
influxdb="/etc/influxdb/influxdb.conf"
|
|
telegraf="/etc/telegraf/telegraf.conf"
|
|
udev_rule="/etc/udev/rules.d/50-tty.rules"
|
|
bootfirmwareconfig="/boot/firmware/config.txt"
|
|
## new conf file paths
|
|
gpsd_new=""$1/gpsd""
|
|
chrony_new="$1/chrony.conf"
|
|
grafana_new="$1/grafana.ini"
|
|
influxdb_new="$1/influxdb.conf"
|
|
telegraf_new="$1/telegraf.conf"
|
|
udev_new="$1/50-tty.rules"
|
|
bootfirmwareconfig_new="$1/boot-firmware-config.txt"
|
|
|
|
# stop da services
|
|
bash ./services.sh stop 1>/dev/null 2>/dev/null
|
|
|
|
# backup conf
|
|
bash ./dump_configs.sh
|
|
|
|
# replace dem by truncation
|
|
echo "Placing the new config files by truncation"
|
|
sudo bash -c "cat $gpsd_new > $gpsd"
|
|
sudo bash -c "cat $chrony_new > $chrony"
|
|
sudo bash -c "cat $grafana_new > $grafana"
|
|
sudo bash -c "cat $influxdb_new > $influxdb"
|
|
sudo bash -c "cat $telegraf_new > $telegraf"
|
|
sudo bash -c "cat $udev_new > $udev_rule"
|
|
|
|
# check if /boot/firmware/config.txt is configured yet
|
|
grep -q -e "GPS PPS signals" /boot/firmware/config.txt
|
|
grepconfig=$?
|
|
|
|
# configure the overlay
|
|
if [ $grepconfig -eq 0 ]; then # if config exists, skip
|
|
echo "/boot/firmware/config.txt already updated, skipping..."
|
|
else
|
|
# APPEND to /boot/firmware/config.txt
|
|
sudo bash -c "cat $bootfirmwareconfig >> $bootfirmwareconfig_new"
|
|
# pps and gpio uart
|
|
# echo "Adding lines to /boot/firmware/config.txt to enable pps and gpio uart..."
|
|
# sudo bash -c "echo '# GPS PPS GPIO Signal' >> /boot/firmware/config.txt"
|
|
# sudo bash -c "echo 'dtoverlay=pps-gpio,gpiopin=18' >> /boot/firmware/config.txt" # pps
|
|
#
|
|
# sudo bash -c "echo '# GPS GPIO UART' >> /boot/firmware/config.txt"
|
|
# sudo bash -c "echo 'enable_uart=1' >> /boot/firmware/config.txt" # enable uart
|
|
# sudo bash -c "echo 'init_uart_baud=921600' >> /boot/firmware/config.txt" # set baudrate here to
|
|
# # i2c
|
|
# sudo bash -c "echo '# I2C Hardware RTC Overlay' >> /boot/firmware/config.txt"
|
|
# sudo bash -c "echo 'dtoverlay=i2c-rtc,ds3231' >> /boot/firmware/config.txt"
|
|
fi
|
|
|
|
# start da services
|
|
bash ./services.sh start 1>/dev/null |