89 lines
3.1 KiB
Markdown
89 lines
3.1 KiB
Markdown
# Version 3:
|
|
|
|
## To Figure Out
|
|
|
|
1. Details on the NEO-F10T/breakout
|
|
1. Battery
|
|
2. GPIO Pinouts
|
|
3. Voltages
|
|
4. GPIO pin pitch
|
|
5. Antenna connector type
|
|
6. Best GPS Antenna+Cable for it
|
|
7. PPS Settings
|
|
8. UART Speed settings
|
|
9. Any pulse out (32kHz maybe?)
|
|
2. [Pulsar Clock](Pulsar-Clock.md)
|
|
1. all daaat shit lmao
|
|
|
|
## Hardware
|
|
|
|
1. Raspberry Pi 5 16GB
|
|
|
|
1. Raspberry OS Lite
|
|
2. NVME hat for NVME boot (? IF NOT INTERFERE WITH GPIO SHIT)
|
|
|
|
1. NVME SSD (? IF NOT INTERFERE WITH GPIO SHIT)
|
|
3. **Custom Hat**
|
|
|
|
1. 1. [RTC](https://www.adafruit.com/product/3013#tutorials) x2
|
|
|
|
1. [CR1220](https://www.adafruit.com/products/380) x2 (Battery)
|
|
2. Gen 10 Timekeeping Specific GPS Module - NEO-F10T
|
|
|
|
1. [Buy Varieties (Europe)](https://gnss.store/collections/neo-f10t-timing-gnss-modules)
|
|
|
|
1. Make sure battery TYPE and APPLICATION is figured out
|
|
1. May have to solder in holder or something
|
|
2. Make sure GPIO pins are FUCKING 2.54mm AND 3.3v OR 5v
|
|
1. use goldddd ones~
|
|
3. Make sure antenna connector is gonna work
|
|
1. GPS cable
|
|
2. GPS antenna
|
|
2. [Product Summary](https://content.u-blox.com/sites/default/files/documents/NEO-F10T_ProductSummary_UBX-22025534.pdf)
|
|
|
|
3. [Data Sheet](https://content.u-blox.com/sites/default/files/documents/NEO-F10T_DataSheet_UBX-22022576.pdf)
|
|
|
|
4. [Hardware Integration Guide](https://content.u-blox.com/sites/default/files/documents/NEO-F10T_IntegrationManual_UBX-22018271.pdf)
|
|
|
|
5. [Chip Product Page](https://www.u-blox.com/en/product/neo-f10t-module)
|
|
|
|
|
|
## Operation Flow
|
|
|
|
Both RTCs loaded time over I2C, both inputting 32kHz signal via GPIO
|
|
|
|
Dual RTC time, GPS time, system time, GPS PPS, dual 32kHz signals, pulsar readings:
|
|
|
|
- tested off each other
|
|
- deltas per pulse (errors) (add to Grafana)
|
|
- averages per pulse (add to Grafana)
|
|
- stored in histograms, constantly updating (add to Grafana)
|
|
- dial in desired confidence interval over time (add to Grafana)
|
|
- divisor/multiplier for 32kHz pulses to make them ONE BEAT constantly updated (displayed in Grafana)
|
|
- one 32kHz oscillator (the most reliable) will be dubbed the "master universal beat pulse", made into pulse by divisor/multiplier based on previous calculations
|
|
- and will serve as source of truth for UBT web display
|
|
- sanity tested against network sources
|
|
|
|
1. Test both RTC times against GPS time
|
|
|
|
2. Test system time against GPS time
|
|
|
|
3. Test system time against network time
|
|
|
|
4. Sanity Checks
|
|
|
|
1. Time reported vs time actual (net)
|
|
2. Cable/system delay calculated vs delay measured
|
|
3. Readability check
|
|
4. Repeatability check
|
|
5. Accuracy check
|
|
6. Precision check
|
|
|
|
## Maybe
|
|
|
|
1. Play with PPS (dial faster?)
|
|
|
|
2. Play with UART speed (dial faster?)
|
|
|
|
|
|
|