57 lines
3.2 KiB
Markdown
57 lines
3.2 KiB
Markdown
## Install
|
|
### Hardware
|
|
1. Raspberry Pi of any type
|
|
2. Timing Specific GPS Module [U-BLOX ublox LEA-M8T-0-10 HUAWEI GPS Module](https://www.ebay.com/itm/134243322249)
|
|
3. High Precision RTC Module like [Adafruit DS3231 Precision RTC Breakout](https://www.adafruit.com/product/3013)
|
|
4. CR1220 Battery for RTC
|
|
5. Female to Female jumper/dupont wires
|
|
6. Raspberry Pi Case that Exposes GPIO
|
|
7. (GPS Antenna)[https://www.aliexpress.us/item/3256808971033962.html]
|
|
8. (Cable for GPS Antenna)[https://www.amazon.com/Superbat-coaxial-Bulkhead-Adapter-Equipment/dp/B07FC8PVZS?th=1]
|
|
9. (GPS Antenna Adaptor)[https://www.amazon.com/dp/B00CVR4NN0]
|
|
|
|
### Setup Pi
|
|
1. `curl -s https://raw.githubusercontent.com/PrincessPi3/Precision-Timekeeping-Fuckery/refs/heads/main/installer_auto.sh?nocache=$RANDOM | sudo $SHELL`
|
|
2. `cd ~/Precision-Timekeeping-Fuckery`
|
|
3. `bash installer1.sh` (will reboot)
|
|
4. `cd ~/Precision-Timekeeping-Fuckery`
|
|
5. `bash installer2.sh` (will reboot)
|
|
6. `cd ~/Precision-Timekeeping-Fuckery`
|
|
7. `bash installer3.sh` (will reboot)
|
|
8. `cd ~/Precision-Timekeeping-Fuckery`
|
|
9. `bash installer4.sh` (will reboot)
|
|
10. Grafana
|
|
1. open grafana web interface in a browser: `http://<ip>:3000`
|
|
2. username `admin` password `admin`
|
|
3. set new password
|
|
4. Dashboards->Import
|
|
1. Upload Garfana-Visualization.json
|
|
5. edit each graph and just save
|
|
11. After 24 Hours
|
|
1. `cd ~/Precision-Timekeeping-Fuckery`
|
|
2. `bash reconfig_full.sh ./running-warn-level-conf` (will reboot)
|
|
|
|
## Scripts
|
|
`uninstall.sh` uninstalls everything
|
|
`chrony_statistics.sh` uses the python script chrony_statistics.py and feeds it copies of tracking statistics to calculate offset
|
|
`cleanup.sh` remove old files
|
|
`dump_configs.sh` make a backup of all configs
|
|
`full_status.sh` show status of all of the componants of Precision-Timekeeping-Fuckery one by one
|
|
`installer_auto.sh` script to initialize the install, it is run first
|
|
* usage: `curl -s https://raw.githubusercontent.com/PrincessPi3/Precision-Timekeeping-Fuckery/refs/heads/main/installer_auto.sh?nocache=$RANDOM | sudo $SHELL`
|
|
`installer1.sh` first manual installer script. runs rpi-config and optionall rpi-update
|
|
`installer2.sh` second manual installer script. performs a dist-upgrade and an autoremove
|
|
`installer3.sh` third manual installer script. adds grafana and telegram repos, uninstalls and disables unneeded junk, installs packages, adds pps-gpio to /etc/modules if not there, autoremove, gives users the right groups
|
|
`installer4.sh` final manual installer script. runs `reconfig_full.sh` and enables the services on boot
|
|
`nuke_logs.sh` does just what it says on the tin
|
|
`reconfig_full.sh` reconfigures services in one of the directories
|
|
* usage: `bash reconfig_full <config_directory>`
|
|
`services.sh` runs an operation on all of the relevant services
|
|
* usage: `bash services.sh [start|status|stop|restart|reload|enable|disable]`
|
|
`show_running_configs.sh` shows the current config files, one by one
|
|
`cable-delay-calc.xlsx` spreadsheet to estimate cable delay in ns
|
|
|
|
## Files
|
|
`status.txt` this shows the progress of an ongoing install, it is automatically created at the start and deleted at the end
|
|
`CHANGEOG.txt` this is all the latest changes
|
|
`version.txt` version of Precision-Timekeeping-Fuckery |